How to Insert Grundéns Wading Boot HEXAGRIP™ Traction Studs


Congratulations on setting yourself up with Grundéns Wading Boots. For added traction, here's a quick 'How-to" on installing the HEXAGRIP™ Alloy Cleats and Carbide Studs.


Hexagrip Cleats

1. Place HEXAGRIP™ cleat in hex recess in the sole of your Grundéns Wading Boot.

2. Using a power or hand screwdriver with a #2 Phillips Head, drive the screw into the sole until the cleat firmly meets the sole of the boot. Be careful not to over-tighten or strip the screw head. Tip: If using a power drive, set the clutch on the lowest setting.


Carbide Studs

1. Using a 1/4" Hex socket driver, drive the screw into the stud recess in the sole until the screw firmly meets the sole of the boot. Be careful not to over-tighten or strip the screw head. Tip: If using a power drive, set the clutch on the lowest setting.


Enjoy your new Grundéns Wading Boots with HEXAGRIP™.